OUR
TECHNOLOGIES
Zanon solid skills and experience is internationally recognized and gained over time by investing in research and development alongside our clients.
EB WELDING
30 years experience in EB Welding
EB welding plant: S.S. Chamber, size 3.4 x 2 x 2m
Oil-free pumping group with cryogenic pump
(3×10-5 mbar 35 minutes)
Nitrogen venting, RGA, 150 kV beam 30KW
CLEAN ROOMS
For clean assembly, final surface treatments, final assembly for the RF cold test.
High Presure rinsing, Ultra pure water rinsing
Total surface 450 sqm
ISO7 area 220 sqm
ISO4 area 200 sqm
Operators dressing rooms, air showers, metallic floating floor.
Customized treatment stations
TIG WELDING
TIG welding equipment
TIG orbital welding machines
High thickness Narrow Gap TIG welding machines/robots
ELECTROPOLISHING
Electropolishing with UPW plant (18MΏcm) and specialized personnel.
VACUUM TEST
Vacuum oven for 800 °C annealing Molibdenum Hot-chamber 0,6 x 0, 6 x 1,5m
(4 units per batch)
Cryogenic pumps, RGA
Temperature uniformity: ± 5° C
Temperature control: over 3 zones
Chamber is actively water cooled
1st and 2nd thermal shield layer: Molybdenum
Heaters: Molybdenum
Load temp control: 10 K-type tc
Chamber temp control: 4 S-type tc (3 + overtemp safety)
Usable working space: 600 x 600 x 1500 mm
THERMAL TREATMENTS
Inert gas oven for final treatment (120°C , 1×10-5 mbar , 52 Hours)
Pumping system with LD for efficient and clean leak detection
Pumping system supported by UPS to avoid power failures
Connection/disconnection in ISO5 local clean room
Operations monitored w/particle counter
Capable of treating two cavities at once
Heating in inert atmosphere (N2)
METROLOGY
Zanon & SIMIC are equipped with the most modern 3D measuring equipment, Know-how on 3D measuring and Reverse Engineering.
Our equipment:
CMM by ZEISs
3 Laser Trackers Faro
2 Faro Arms
Laser scanning
T-probe & T-scan
Photogrammetry
Spatial Analyzer software
RF & FINAL TUNING
Dedicated Desy equipment and qualified personnel for sub-component RF control and cavity final tuning